MAGSOL PRO
Split Solar Streetlight
40W - 120W
7 840lm - 23 520lm
MagSol Pro Overview
The MagSol Pro is a split solar LED streetlight designed for roads, parking areas, public spaces, security applications and remote locations requiring dependable off-grid illumination. Unlike an all-in-one solar streetlight, its two-piece architecture separates the photovoltaic panel from the LED luminaire and battery system, providing greater flexibility when positioning the solar panel for the available solar resource.
Available from 40 W to 120 W with outputs from 7,840 lm to 23,520 lm, the MagSol Pro combines Grade A TOPCon solar technology, LiFePO₄ battery storage, MPPT charging and intelligent motion-responsive control. The PV panel can be positioned at 0°, 15°, 30° or 45°, allowing its orientation and tilt to be adapted to the installation location while the luminaire is independently positioned according to the lighting requirement.
Key Benefits
-
Split-system flexibility – the solar panel can be orientated independently from the luminaire to improve solar energy capture.
-
Adjustable PV panel – four tilt positions of 0°, 15°, 30° and 45° support location-specific panel positioning.
-
High-capacity LiFePO₄ storage – battery capacities from 627 Wh to 1,536 Wh provide greater stored energy across the range.
-
High-efficiency LED lighting – up to 196 lm/W with outputs reaching 23,520 lm.
-
Smart MPPT energy management – charging efficiency up to 98% with configurable operating profiles and motion-responsive control.
-
Extended off-grid autonomy – designed for more than 24 hours at full charge with backup of up to four rainy days under the stated conditions.
Specifications
-
40W
-
60W
-
80W
-
100W
-
120W
-
-
40W - 7,840lm
-
60W - 11,760lm
-
80W - 15,680lm
-
100W - 19,600lm
-
120W - 23,520lm
-
-
196lm/w
-
-
100,000 hrs
-
-
40W = 4-8 meters
-
60W = 4-8 meters
-
80W = 4-12 meters
-
100W = 6-12 meters
-
120W = 6-12 meters
-
-
40W - 135W / 18V
-
60W - 195W / 18V
-
80W - 195W / 18V
-
100W - 250W / 18V
-
120W - 250W / 18V
-
-
Monocrystalline TOPCon Grade A – up to 25.5% efficiency and 97% conversion efficiency in low light
-
-
0° | 15° | 30° | 45°
-
-
IEC 61215 · IEC 61730 Parts I & II · IEC 60904
-
-
Lithium Iron Phosphate (LiFePO₄)
-
-
40W - 627 Wh
-
60W - 922 Wh
-
80W - 1152 Wh
-
100W - 1280 Wh
-
120W - 1536 Wh
-
-
>4,000 cycles @ 80% DoD · Design life >10 years
-
-
5-6 Hours
-
-
> 24 Hours at Full Charge, Up to 4 Rainy Days Back Up
-
-
MPPT Smart Controller · Up to 98% charging efficiency
-
-
360° microwave motion sensor · Detection up to approximately 8 m when installed at the recommended mounting height.
-
-
Battery Management System (BMS)
-
-
IP65
-
-
IP66
-
Applications
-
Solar street lighting
-
Residential and rural roads
-
Parking areas
-
Parks and gardens
-
Pedestrian areas
-
Pathways
-
Perimeter and security lighting
-
Remote sites
-
Off-grid infrastructure
Solar System & Intelligent Control
The MagSol Pro is engineered as a complete off-grid solar energy and lighting system. Its split architecture allows the photovoltaic panel to be positioned independently from the luminaire, providing greater flexibility when optimising both solar energy generation and lighting performance.
PV generation, LiFePO₄ energy storage, MPPT charging, LED performance and the selected operating profile work together to determine the performance and autonomy of the complete system.
Adjustable TOPCon Monocrystalline Solar Panel
The MagSol Pro uses Grade A monocrystalline TOPCon photovoltaic technology to generate energy during daylight hours and recharge the LiFePO₄ battery system.
Unlike a fixed all-in-one solar streetlight, the MagSol Pro PV panel can be positioned independently of the luminaire. Four tilt positions are available:
0° | 15° | 30° | 45°
This allows the panel angle to be adapted according to the installation location and available solar resource while the streetlight itself remains positioned for the required roadway or area-lighting distribution.
The Grade A TOPCon cells are specified at up to 25.5% efficiency with enhanced conversion performance in low-light conditions. Waterproof plug-and-play connections simplify installation while supporting reliable outdoor operation.
The photovoltaic modules are specified against IEC 61215, IEC 61730 Parts I and II and IEC 60904 requirements.
Configure Your Solar Streetlight
The MagSol Pro can be configured around your location, mounting height, required light output, PV panel orientation and operating profile. Correct system sizing helps balance lighting performance, battery capacity and available solar energy.
Use the Magnitech Solar Lighting Configurator to build a solar lighting solution around the requirements of your project.